APlusLift HW-10KOH-A 10000LB Two Post Overhead Clear Floor Car Lift/Industry Leading 3 Year Warranty
$550.40
Description
-
-
-
Industry-leading 3-YEAR WARRANTY
-
Combo (symmetrical and asymmetrical) Arm Assembly with Adjustable Screw Pads!
-
CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity
-
One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters
-
All Robot Welded Structure with Durable Powder Coated Finish
-
-
APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. We also have an 10000LB overhead car lift with a single-point release.
We are proud to offer an industry-leading 3-year warranty for all parts (a $499 value)! We have available for our lifts. We welcome suggestions to improve our products and service!
Free shipping to the lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require an on-site forklift We strongly recommend against renting a forklift; expenses are not reimbursed. See the shipping policy below for limited access/remote/high-cost areas.
Specifications |
|||
| Model | HW-10KOH-A (This Model) |
AP-10SR (for Comparison) |
|
| Manual | HW-10 KOH- A manual | AP-10SR Manual | |
| Style | Overhead | Overhead | |
| Lock Release | Double Point Release | Single Point Release | |
| Warranty | 3 Years (36 months) | 3 Years (36 months) | |
| Lifting Capacity | 10,000 LB | 10,000 LB | |
| Overall Height | 143 3/16″ | 143 3/16″ | |
| Overall Width | 134 5/16″ | 134 5/16″ | |
| Maximum Lift height with Truck Adapters | 81″ | 81″ | |
| Maximum Lift height without Truck Adapters | 75″ | 75″ | |
| Maximum lift height from bottom of the arm to the ground | 71″ | 71″ | |
| Minimum Height of Adjustable Pads from Ground | 4″ | 4″ | |
| Drive Through Width (Carriage to Carriage) | 100″ | 100″ | |
| Column to Column Width | 109″ | 109″ | |
| Column Cross Section | 11″L x 7″W | 11″L x 7″W | |
| Driving Mode | Dual hydraulic cylinders, chain drive | Dual hydraulic cylinders, chain drive | |
| Motor | 220V Single Phase 3HP 10A (recommend a 30A breaker) | 220V Single Phase 3HP 10A (recommend a 30A breaker) | |
| Hydraulic Oil | 3-5 gallons AW32/AW46 (not included) | 3-5 gallons AW32/AW46 (not included) | |
| Time to full rise | 50 seconds | 50 seconds | |
| Shipping Weight | 1470 LB | 1400 LB and 120 LB | |
| Shipping package size | 113″L x 22″W x 40″ H |
|
|
| Concrete Requirement |
6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below) |
||
| Parts Included |
|
||
| Arm Assembly |
Combo (symmetrical and asymmetrical) Arm Assembly |
||
| Front Arms |
Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″ |
||
| Back Arms |
Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″ |
||
| Column Steel Thickness |
13/64″ |
||
| Carriage Steel Thickness |
15/64″ |
||
| Carriage Yoke Thickness |
9/16″ |
||
| Arm Steel Thickness |
15/64″ |
||
| Base Plate Steel Thickness |
5/8″ |
||
| Model | HW-10KOH-A (This Model) |
||
Features
- CE Certified Lift Structure and Hydraulic System
- Third-party tested with a dynamic load capacity of 115%
- Third-party tested with a static load capacity of 150%
- Durable hydraulic system
- Easy to operate and maintain
- Double-point safety lock release
- Double seal rings protecting PU material
- Carriage material Q355 (ASTM A572), stronger than normal Q235 steel
- Lifting operation by pressing the “UP” button on the motor
- Manual lowering operation by pressing the lever
- Relief valve built-in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built-in power pump to prevent overloading
- Door guard protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down
Reviews (0)
Shipping & Delivery
WHERE DO WE DELIVER?
We provide shipping all over the United States.
HOW MUCH DOES SHIPPING COST?
We offer Free Standard Shipping on all orders.
DELIVERY METHODS?
We use trusted carriers, including FedEx, 4PX, USPS, and UPS, to deliver your products safely and securely.
HOW LONG WILL IT TAKE TO RECEIVE MY ORDER?
- Handling Time: 1 business day (Monday – Friday).
- Transit Time: 1-3 business days (Monday – Friday).
- Order Cut-off Time: 11:00 PM EST (Eastern Standard Time) UTC/GMT -5 hours
Reviews
There are no reviews yet.